Orange Peel
\nGrapple
\t\t\t\tThe Demarec polypgrab meets the most important requirements of the customers. The Demarec Orange Peel Grapple with its two different types of 360 ° rotation is designed to provide a Orange Peel Grapple for handling bulky materials with maximum closing force and optimum weight / performance ratio in daily use.
\t\t\t\t\t\t\t\t![\"Polypgrab](\"https://demarec.com/wp-content/uploads/2025/07/IMG_9327-1024x768.webp\")
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\tmaximum volume
of 5000 Liters
\t\t\t\tThis robust tool can be used for a wide variety of jobs, e.g. scrap metal processing. Orange Peel Grapple with 4 or 5 tines and 450 liter volume for handling coarse scrap metal with excavators from 16t to 22t operating weight, or as a heavy version (HD series) for excavators from 20t to 200t operating weight and with a maximum volume of 5000 liters.
\t\t\t\t\t\t\t\t![\"Polypgrab](\"https://demarec.com/wp-content/uploads/2025/07/P51V-r-rgb-1024x768.webp\")
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t![\"Polypgrab](\"https://demarec.com/wp-content/uploads/2025/07/P40VHD8005W0090-1024x1024.png\")
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\tMaximum closing forceuse
\nand optimum weight &
performance ratio for daily
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\tKey features & benefits
\t\t\t\tRotation
\t\t\t\tRobust, fully integrated rotation
With sturdy swivel head and internal hoses against hose breakage
Optimal power transmission
Integrated pressure relief valve against overload
Gland and bevel sealed; rotating feed-through and motor directly accessible (P30 – P200)
![\"red](\"https://demarec.com/wp-content/uploads/2025/05/Demarec-stripe-dot.png\")
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\tMain carrier
\t\t\t\tWrap around design of main carrier protects hydraulic cylinders and hydraulic hoses 100%
Good access to hoses and oil distributor thanks to easily removable covers
Mounting of radiation detector or magnet possible
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\tHydraulics
\t\t\t\tMaximum working pressure 350 bar
Hydraulic cylinders damped to protect against impact loads
Non-return valve prevents accidental pressure drop
Piston rod protection encloses the piston rod and prevents damage
Use of high pressure hoses, this allows even the highest pressures caused by impact to be absorbed
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t![\"Polypgrab](\"https://demarec.com/wp-content/uploads/2025/07/P40VHD8005W0063-1024x1024.png\")
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\tWeight / performance ratio
\t\t\t\tAll components are optimized for tension and weight with FEM: means 10% weight reduction with 20% stress reduction
Use of fine grain steel with high strength
All wear plates made of highly wear resistant steel 400 HB
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\tBearings
\t\t\t\tGenerously sized pin joints reduce surface pressure
Induction hardened pins are in steel bushings
Tooth heads and main bearings are widely spaced to accommodate deformation and reduce surface pressure in the bushings
Lateral pressure discs provide solid support for the teeth and reduce wear to a minimum
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\tTooth
\t\t\t\tSlim, contour optimized tine guarantees ideal penetration
No protruding parts, ensures perfect removal of the goods
Huge limit stops relieve the hydraulics in extreme positions
The ideal tooth circumference prevents materials from sticking that could potentially damage the cylinder
Forged tips of teeth 500 HB
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t| Type | Machineweight* | Flow open/close (l/min) | Rotation Pmax (bar) | Number of tines | Volume (litre) | Closing fore** (kN) | Self weight of tines (kg) | Opening A (mm) | Width E (mm) | Height C max. (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| DPG-22 | 16 – 22 t | 50-150 | 320 | 4 – 5 | 450 | 17 | 810 – 1145 | 1910 | 1370 | 1545 |
| DPG-30 | 20 – 30 t | 120 – 200 | 170 | 4 – 5 | 600 | 27 | 1310 – 1830 | 2130 – 2290 | 1520 – 1525 | 1980 – 2065 |
| DPG-40-3 | 26 – 40 t | 120 – 200 | 170 | 3 | 600 | 38 | 1390 – 2045 | 2200 – 2835 | 1420 – 1860 | 2065 |
| DPG-40 | 26 – 40 t | 120 – 200 | 170 | 4 – 5 | 800 | 38 | 1530 – 2140 | 2165 – 2190 | 1430 – 1560 | 2170 |
| DPG-51 | 36 – 50 t | 200 – 350 | 200 | 4 – 5 | 1000 | 33 | 1570 – 2300 | 2440 – 2830 | 1610 – 1870 | 2200 – 2500 |
| DPG-80 | 50 – 80t | 200 – 350 | 200 | 4 – 5 | 2500 | 40 | 2500 – 3420 | 2770 – 3180 | 2010 – 2325 | 2770 – 3155 |
| DPG-120 | 80 – 120 t | 200 – 350 | 140 – 250 | 5 | 3000 | 61 | 4220 – 4700 | 3200 – 3910 | 2280 – 2390 | 3180 – 3350 |
| DPG-P-25 | 18 – 25 t | 50-200 | 170 | 3 | 600 | 38 | 1650 – 1780 | 2200 – 2250 | 1420 – 1560 | 1775 – 1780 |
| * Machine weight is indicative. |
Download our free
\nDPG brochure
\t\t\t\tWant to know more about our Polyp grabs?
Download the brochure for more info by filling out the form below.
![\"Polyp](\"https://demarec.com/wp-content/uploads/2025/07/DPG-brochure-mockup-687x1024.webp\")
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t